Connection at the rear of ts-590s

Hookin up those Audio Boxes without gettin yourself Perplexed.
Post Reply
Hugovoodoo2012
Audio Head
Posts: 3
Joined: Thu Dec 13, 2012 11:31 am
Location: Portugal

Connection at the rear of ts-590s

Post by Hugovoodoo2012 » Thu Jun 27, 2013 2:02 am

Hello

I would like if possible to give me a hand with the audio connection on the back of my Ts-590. I wonder how it is done and if you need to do some internal changes or not as the Ts-870.

Thank you 73's

User avatar
Voodoo Guru
VooDoo Site Admin
Posts: 717
Joined: Wed Feb 23, 2005 8:47 am
Location: Down there on the right...

Post by Voodoo Guru » Wed Jul 03, 2013 1:48 am

Howdy HugoVoodoo2012,

Come on, Someone out there must have played around with a TS-590!
Let us know what you did to help Hugo out.

Thanks,
Voodoo Guru
From Deep in the IDD of the Sub-Harmonix Realm

User avatar
lu7bse
Audio Head
Posts: 4
Joined: Tue Nov 25, 2008 7:45 am
Location: Buenos Aires, Argentina

Re: Connection at the rear of ts-590s

Post by lu7bse » Wed Dec 25, 2013 9:07 pm

Hello my TS-590s use the same connector ACC2 my 870, the audio cuts in 3Khz sounds great with external equalizers, really sounds great!
Image

KC7OV
Voodoo Audiophile
Posts: 61
Joined: Wed Feb 25, 2009 11:37 am
Location: Yelm,Wa.

TS-590

Post by KC7OV » Wed Dec 25, 2013 11:47 pm

Greetings. There is a cable for the acc2 port you can get on e-bay: Kenwood Interface Adapter DC-02P. I use one on my 870. Works great! No hassles trying to solder up one yourself. Menu settings as follows: 27 & 28 set your TX bandwidth, 63 set to ACC2 (should be set already by default), 66 sets the input level (default is 4 but adjust for proper ALC). Hopes this helps and I just realized this was an old post so maybe this info will be useful to someone else using the 590. 73.
Last edited by KC7OV on Sun Jun 01, 2014 5:42 am, edited 1 time in total.
Mike KC7OV

User avatar
lu7bse
Audio Head
Posts: 4
Joined: Tue Nov 25, 2008 7:45 am
Location: Buenos Aires, Argentina

Re: TS-590

Post by lu7bse » Thu Dec 26, 2013 10:39 am

tx audio on the 590 is like my 870, works great, alc level can be adjusted easily from the menu.
Image

dirtyjob
Audio Head
Posts: 1
Joined: Thu Dec 12, 2013 1:03 am

Post by dirtyjob » Tue May 13, 2014 11:45 pm

i know this is an older thread but it helped me out, thanks for the Kenwood Interface Adapter DC-02P info, saved me some trouble :)

User avatar
Voodoo Guru
VooDoo Site Admin
Posts: 717
Joined: Wed Feb 23, 2005 8:47 am
Location: Down there on the right...

Post by Voodoo Guru » Sun Jun 01, 2014 1:37 am

Howdy Dirtyjob,
Great to have you on the forum!!!

We're glad the info helped you out. That's the main reason this forum was created was to build an information database over the years.
Take care,
Voodoo Guru
From Deep in the IDD of the Sub-Harmonix Realm

toxicooze
Audio Head
Posts: 6
Joined: Sat Jan 24, 2015 9:13 pm

Post by toxicooze » Tue Mar 24, 2015 9:54 pm

Hello all

I have the Kenwood Interface Adapter DC-02P but when I plug it into the back of the acc2 port and turn on the Kenwood TS-590s the speaker makes like a machine gun sound and sounds like ther's a conflict.

Has anyone else had this problem and could suggest something to help fix it please.

Many thanks

Bob

toxicooze
Audio Head
Posts: 6
Joined: Sat Jan 24, 2015 9:13 pm

Post by toxicooze » Wed Mar 25, 2015 1:25 am

Hello all

All fixed, it was a short on the ground pin 4, had to re-solder it working 100% now :)

Cheers
Bob

Post Reply