Bellari RP562 hum

Force them Rigs to accept True Voodoo!
Post Reply
User avatar
ECC82
Voodoo Audiophile
Posts: 73
Joined: Tue Jul 03, 2012 1:06 pm
Location: The Netherlands

Bellari RP562 hum

Post by ECC82 » Mon Jun 26, 2017 2:32 am

Encountered the following problem: when increasing the Bottom knob volume there is also an increase in hum. Problem could be that the transformers are to close to the mainboard. Someone here who cured that problem?

73'
Chris
PA3TVI
===================
>> Livin' la VooDoo Loca <<
===================

User avatar
Voodoo Guru
VooDoo Site Admin
Posts: 717
Joined: Wed Feb 23, 2005 8:47 am
Location: Down there on the right...

Post by Voodoo Guru » Sun Oct 29, 2017 9:25 am

Howdy Chris,
More then likely the problem is with the filter capacitors in the low voltage +-15V power supply. This is a common problem with the Bellari equipment. We have also had problems with the voltage regulator transistor in the high voltage power supply creating hum and noise.

Good Luck!
Voodoo Guru
From Deep in the IDD of the Sub-Harmonix Realm

User avatar
ECC82
Voodoo Audiophile
Posts: 73
Joined: Tue Jul 03, 2012 1:06 pm
Location: The Netherlands

Post by ECC82 » Thu Nov 02, 2017 11:24 am

Thanks, Voodoo Guru. I will certainly try to cure this problem. Think the Panasonic FC caps will bring improvement. Will have to check how many and what Pf/voltage is needed.
===================
>> Livin' la VooDoo Loca <<
===================

Post Reply