FT DX3000 Settings

Force them Rigs to accept True Voodoo!
Post Reply
DJ7ZZ
Audio Head
Posts: 1
Joined: Thu Oct 03, 2013 12:17 am

FT DX3000 Settings

Post by DJ7ZZ »

Hi,
I use a FTDX3000 now since two days. Does anyone know, how to encrease the TX-bandwith to 4kc like FTDX5000 or FT2K ?

!KANT
Voodoo Audio Crew Moderator
Posts: 401
Joined: Wed Mar 09, 2005 10:22 pm
Contact:

Post by !KANT »

I believe there was a firmware update. The FT-DX-3K can hit 4.2kHz if EQ'ed correctly, but the low end end suffers by dropping like a rock at 100Hz. If Yaesu allows for extended low-end response [to 40Hz] the DX-3K would really have an improved sound.

User avatar
mrspock13
Audio Head
Posts: 1
Joined: Thu Mar 13, 2014 10:08 pm

Post by mrspock13 »

I also just bought an FTDX-3000..... was wondering if anyone out there has any tweaks or settings that would help with ESSB.....

73's
K2PJR

johnk4jmk
Audio Head
Posts: 4
Joined: Mon Feb 10, 2014 6:40 pm

Post by johnk4jmk »

this might help you of course set you BPF to at least 3.0 then all these setting depends on your mic and your voiceif you have a deep voice you might have to notch the lows from 100 to 200 but here they are
menu 159-100
162-10
165-3
160-700
163- (-3)
166- 7
161-3200
164- 10
167-2
this might help you or you can use a starting point on Bob Heil's sight go to dsp settings and he has some settings for alot of rigs ,hope this help's

Torre Blanca
Audio Head
Posts: 2
Joined: Fri Dec 19, 2014 2:59 pm

Post by Torre Blanca »

1. Make sure power is off.
2. Find the CS and TXW buttons just left of the Freq Dial.
3. Push and hold "CS" and "TXW" buttons in while powering the radio via the "ON/OFF" switch.
4. Select Menu# 104 and see that "TTBF" has replaced 3000WB.
5. If you wish to go back to 3000WB just do steps 1 to 4. :D :D :D :D :D :D

User avatar
Voodoo Guru
VooDoo Site Admin
Posts: 719
Joined: Wed Feb 23, 2005 8:47 am
Location: Down there on the right...

Post by Voodoo Guru »

Howdy Torre,

Welcome to the Forum!
It is great to have you on board with us.
Thanks for the Power On Menu Tweak!
Take Care,
Voodoo Guru
From Deep in the IDD of the Sub-Harmonix Realm

Torre Blanca
Audio Head
Posts: 2
Joined: Fri Dec 19, 2014 2:59 pm

Post by Torre Blanca »

Guru anything I have this mod on my Ftdx1200 and process incoming audio with Waves), transmits in 4 KH smoothly Argentina greetings ... the end of the world !!!!

Post Reply