Bellari UK Mains Voltage.

All the other Voodoo Audio Topics.
Post Reply
Glenn Nutsey
Voodoo Audio Head
Posts: 13
Joined: Fri Apr 19, 2013 3:44 pm

Bellari UK Mains Voltage.

Post by Glenn Nutsey »

Hi,
Just received my new Bellari RP520 & 533 from "sunny Utah" and I wanted to know pif it will run straight from the UK 240 v supply.

The instructions only state:

Power 120VAC (230VAC) 15VA

I assume it runs both but no doubt there a several UK Bellari users who could confirm please.

Thanks

Glenn

User avatar
Voodoo Guru
VooDoo Site Admin
Posts: 719
Joined: Wed Feb 23, 2005 8:47 am
Location: Down there on the right...

Post by Voodoo Guru »

Howdy Glenn,
We know on the older units that the primary windings of the power transformer had to be wired different to operate on 240VAC. The primary windings were wired in series for 240VAC, and wired in parallel for 120VAC mains.

If you bought these new from Rolls/Bellari, you might send them an email and ask if they were wired for 240VAC, or ask them to send you the instructions to convert it to 240VAC.

Good Luck!
Voodoo Guru
From Deep in the IDD of the Sub-Harmonix Realm

Post Reply