I'm wondering if anyone here has a TS-850 with the JEZB chip handy and also has an EPROM programmer/reader. If so, could I convince you to dump the contents and send me a copy?
- Start with the radio off
- Press and hold the SCAN key and the TX M.CH key together
- While holding the keys, turn the radio on
. The extended service menu should appear and display the firmware checksum
- When done, press the CLR key to exit the extended service menu
The checksum is displayed as a 4 digit hexadecimal value. On my radio, it says: 6B4B. If you have the JEZB firmware chip and it reports the same number, then I just need to know that. (This would confirm that I have the right firmware and don't need a newer version.)If it says something different, then I may need to go hunting for a newer chip.
-Bill, N1GPT