sennheiser mkh 416 p48

Reproducing that Incoherent Rhetoric from the Flapping Pie Hole...
Post Reply
btr
Audio Head
Posts: 5
Joined: Sat Apr 10, 2010 4:49 am

sennheiser mkh 416 p48

Post by btr »

I do not know how to use a preamplifier for this microphone. Does anyone help?

SawzAll
Voodoo Audiophile
Posts: 66
Joined: Fri Jun 25, 2010 4:22 pm

Post by SawzAll »

Well, since it is a condenser-type mic element - you will have to plug the mic into the mic preamp, TURN THE "PHANTOM POWER" SWITCH "ON", and then adjust the mic gain and output knobs up until you are seeing output on the meter.

This mic wouldn't be my choice for Ham broadcast app; but it might work out for you. Never used a 'shotgun' type mic before. Never needed to. For less money spent, you could have gotten a ElectroVoice RE-27. But it should work; just cannot say how well it will work for radio.

Post Reply