EX3200 or what?

The essence of Perfection. What is it that makes that Surreal Sound?
Post Reply
INXS
Voodoo Audio Head
Posts: 18
Joined: Tue Aug 03, 2010 7:57 am

EX3200 or what?

Post by INXS »

Having read so much about the EX3200 here on the forum, it is no longer available by Behringer.
Can someone point me in the direction of how to acquire myself one, preferrebly one with the VOOOODOOO Mod. Also, is there a replacement for the EX3200, and if so, how does it compares to the EX3200?

User avatar
Bow
Voodoo Audiophile
Posts: 77
Joined: Mon Jan 29, 2007 10:30 am
Location: Yuma, AZ

Re: EX3200 or what?

Post by Bow »

INXS wrote:Having read so much about the EX3200 here on the forum, it is no longer available by Behringer.
Can someone point me in the direction of how to acquire myself one, preferrebly one with the VOOOODOOO Mod. Also, is there a replacement for the EX3200, and if so, how does it compares to the EX3200?
EBAY

Or find another ESSB guy parting with his
Bow


Quite possibilly the only 3.3 Khz wide Icom IC-718 in the world...

INXS
Voodoo Audio Head
Posts: 18
Joined: Tue Aug 03, 2010 7:57 am

Post by INXS »

Is there any replacement for the EX3200?

User avatar
Voodoo Guru
VooDoo Site Admin
Posts: 719
Joined: Wed Feb 23, 2005 8:47 am
Location: Down there on the right...

Post by Voodoo Guru »

Unfortunately there is no replacement for the EX3200.
Everything else lacks the Surround Processor which is vital for phasing the harmonix in between the harmonix when connected as shown in the UDX Mod.

Take Care,
Voodoo Guru
From Deep in the IDD of the Sub-Harmonix Realm

INXS
Voodoo Audio Head
Posts: 18
Joined: Tue Aug 03, 2010 7:57 am

Post by INXS »

Thanks Gentlemen, now I will begin my quest of obtaining an EX3200.

PS. should anyone have an extra EX3200 for sale I'll be very much interested.

73 de Milverton.

User avatar
YO3IBW
VooDoo Audio Crew
Posts: 40
Joined: Sat Aug 08, 2009 8:14 am
Location: Bucharest, Romania
Contact:

Post by YO3IBW »

There where a discussion on this forum about BEHRINGER SX3040 that this could be the new version of EX3200. Anyone did any test on this new box? :)
73 de Dan YO3IBW
http://www.buz.ro

XLAXX
Voodoo Audio Head
Posts: 22
Joined: Thu Jul 08, 2010 12:48 pm

Post by XLAXX »

I think I would hold off on purchasing a EX3200 right now,... the HFA04TB60PBF-ND HexFreds seem to be very hard to find. The backorder dates for them are over a year (5/2011) was what I was quoted today.
VooDoo Guru, can you recommend a substitute part or another value that would be acceptable to replace the HFA04TB60PBF-ND with?

Thanks.

XLAXX

XLAXX
Voodoo Audio Head
Posts: 22
Joined: Thu Jul 08, 2010 12:48 pm

Post by XLAXX »

... da Voodoo cometh and my cup runneth over...

Did the mod after ordering the Hex Freds from Farnell. The difference in the low end is truly amazing. I was very surprised.

My only problem at this point is fiddling with the higher end. I still can hear some distortion in my 'SSS' and 'TTTs' .

Any parameters I can re-adjust in the DEQ-2496 to help me out with this?

Thanks

XLAXX

User avatar
Voodoo Guru
VooDoo Site Admin
Posts: 719
Joined: Wed Feb 23, 2005 8:47 am
Location: Down there on the right...

Post by Voodoo Guru »

Howdy XLAXX,
Check out the post in this thread -
http://www.wz5q.net/talkvoodoo/viewtopic.php?t=316

Take Care,
Voodoo Guru
From Deep in the IDD of the Sub-Harmonix Realm

Post Reply