hello. i would like to know if anyone here know how to feet the ft920 direct thru the balance modulator.
thanks de kp2bh jimmy
ft920 modulation thru balance modulator
-
- Audio Head
- Posts: 7
- Joined: Thu Sep 01, 2005 12:17 pm
- Voodoo Guru
- VooDoo Site Admin
- Posts: 719
- Joined: Wed Feb 23, 2005 8:47 am
- Location: Down there on the right...
Hmmm....
Hmmmm...
We've never had one to play with.
It shouldn't be to difficult though. If you don't find an answer, We could download the Service Manual and look at the schematic.
Most of the Balanced Modulator Mods are all basically the same.
You inject the Line Level Audio into the input of the Balanced Modulator IC thru a Capacitor.
This of course bypasses all the Frequency restrictive Microphone amplifiers in the rig.
Let us know if you don't find any information.
We've never had one to play with.
It shouldn't be to difficult though. If you don't find an answer, We could download the Service Manual and look at the schematic.
Most of the Balanced Modulator Mods are all basically the same.
You inject the Line Level Audio into the input of the Balanced Modulator IC thru a Capacitor.
This of course bypasses all the Frequency restrictive Microphone amplifiers in the rig.
Let us know if you don't find any information.
Last edited by Voodoo Guru on Fri Sep 18, 2009 2:54 pm, edited 2 times in total.
Voodoo Guru
From Deep in the IDD of the Sub-Harmonix Realm
From Deep in the IDD of the Sub-Harmonix Realm