Triple C installation

Hookin up those Audio Boxes without gettin yourself Perplexed.
Post Reply
Glenn Nutsey
Voodoo Audio Head
Posts: 13
Joined: Fri Apr 19, 2013 3:44 pm

Triple C installation

Post by Glenn Nutsey » Sat May 24, 2014 4:45 pm

Hi,
I have just bought a triple C to install after my EX3200 and before my DSP2024. It looks like I need balanced TRS leads but I am not sure. Can anybody confirm the leads and which input and outputs are used and if the channels are tied together.
73's Glenn M1 AQO

User avatar
Voodoo Guru
VooDoo Site Admin
Posts: 718
Joined: Wed Feb 23, 2005 8:47 am
Location: Down there on the right...

Post by Voodoo Guru » Sun Jun 01, 2014 2:38 am

Howdy Glenn,

The Triple C uses 1/4" TRS Balanced Connectors.

The Triple C came in 2 flavors, the Single Channel Version and the Stereo Version. It will be labeled as such on the front panel.

The Single Channel version looks like it has 2 inputs and outputs for 2 channels, but 2 of the jacks are for side chaining. The jacks are clearly marked as to their function.

On the Stereo Unit, usually only one channel is used on the Triple C and the 2 channels are not tied together.

Take Care,
Voodoo Guru
From Deep in the IDD of the Sub-Harmonix Realm

Post Reply