White noise ?
White noise ?
Hey guys I'm having white noise when I'm not talking but keyed up on FM Im running a multi gate pro xr 4400 to get rid of the back round noise and when I turn down either via I box or mixer board it gets rid of it but they can barely hear me or I'm pinched up any ideas is a downward expander different than my multi gate?
- Voodoo Guru
- VooDoo Site Admin
- Posts: 719
- Joined: Wed Feb 23, 2005 8:47 am
- Location: Down there on the right...
Howdy N9WYV,
Welcome to the Forum!
There is not a lot of information in your post to really help you, but just guessing off hand it sounds like a Gain Structure Problem.
What are you using for Audio Equipment and a Transmitter, also how are you connecting everything?
That is a very basic description, for a more involved explanation look at this link to a RaneNote from Rane.com.
Click on Chapter 5 - Expanders, Gates, & Duckers
http://www.rane.com/note155.html
Take Care,
Welcome to the Forum!
There is not a lot of information in your post to really help you, but just guessing off hand it sounds like a Gain Structure Problem.
What are you using for Audio Equipment and a Transmitter, also how are you connecting everything?
Your XR 4400 is a Downward Expander. All that means is it is a highly adjustable Noise Gate. A Noise Gate is basically either "ON" to OFF". The Downward expander gives you some adjust-ability and shaping to the triggering, hold time, and release.any ideas is a downward expander different than my multi gate?
That is a very basic description, for a more involved explanation look at this link to a RaneNote from Rane.com.
Click on Chapter 5 - Expanders, Gates, & Duckers
http://www.rane.com/note155.html
Take Care,
Voodoo Guru
From Deep in the IDD of the Sub-Harmonix Realm
From Deep in the IDD of the Sub-Harmonix Realm
I'm running for gear is
Behringer T-1 tube mic
Mic 2200
Xr-4400
FAQ 3102
Mdx2200
Sx3040 both sides
Mdx2200
Euro rack 2004a
Dsp 2024p is fed through aux1 in the mixer
W2ihy ibox
I'm running it to my ic 746 and my 756 pro III
When running through my pro it only passes lows and highs no mids out the radio just wierd
Behringer T-1 tube mic
Mic 2200
Xr-4400
FAQ 3102
Mdx2200
Sx3040 both sides
Mdx2200
Euro rack 2004a
Dsp 2024p is fed through aux1 in the mixer
W2ihy ibox
I'm running it to my ic 746 and my 756 pro III
When running through my pro it only passes lows and highs no mids out the radio just wierd
- Voodoo Guru
- VooDoo Site Admin
- Posts: 719
- Joined: Wed Feb 23, 2005 8:47 am
- Location: Down there on the right...