Hello
I would like if possible to give me a hand with the audio connection on the back of my Ts-590. I wonder how it is done and if you need to do some internal changes or not as the Ts-870.
Thank you 73's
Connection at the rear of ts-590s
-
- Audio Head
- Posts: 3
- Joined: Thu Dec 13, 2012 11:31 am
- Location: Portugal
- Voodoo Guru
- VooDoo Site Admin
- Posts: 719
- Joined: Wed Feb 23, 2005 8:47 am
- Location: Down there on the right...
Re: Connection at the rear of ts-590s
Hello my TS-590s use the same connector ACC2 my 870, the audio cuts in 3Khz sounds great with external equalizers, really sounds great!
TS-590
Greetings. There is a cable for the acc2 port you can get on e-bay: Kenwood Interface Adapter DC-02P. I use one on my 870. Works great! No hassles trying to solder up one yourself. Menu settings as follows: 27 & 28 set your TX bandwidth, 63 set to ACC2 (should be set already by default), 66 sets the input level (default is 4 but adjust for proper ALC). Hopes this helps and I just realized this was an old post so maybe this info will be useful to someone else using the 590. 73.
Last edited by KC7OV on Sun Jun 01, 2014 5:42 am, edited 1 time in total.
Mike KC7OV
Re: TS-590
tx audio on the 590 is like my 870, works great, alc level can be adjusted easily from the menu.
- Voodoo Guru
- VooDoo Site Admin
- Posts: 719
- Joined: Wed Feb 23, 2005 8:47 am
- Location: Down there on the right...
Hello all
I have the Kenwood Interface Adapter DC-02P but when I plug it into the back of the acc2 port and turn on the Kenwood TS-590s the speaker makes like a machine gun sound and sounds like ther's a conflict.
Has anyone else had this problem and could suggest something to help fix it please.
Many thanks
Bob
I have the Kenwood Interface Adapter DC-02P but when I plug it into the back of the acc2 port and turn on the Kenwood TS-590s the speaker makes like a machine gun sound and sounds like ther's a conflict.
Has anyone else had this problem and could suggest something to help fix it please.
Many thanks
Bob