X-treme eSSB Audio FORUM

Hey all - it's my first post so please be gentle

I'm looking for the best way to hook-up my rack gear to my 950SDX

Currently I have:

MIC2200 Preamp---->
DEQ2496 Ultracurve EQ--->
EX3200 Sound Enhancer------->
DSP2024P Effects Processor---------->

--------------> IBox-- ---------> TS-950SDX

Output of Ch1 EX3200 goes into Input of Ch2 for some additional harmonix.

Do I need another compressor (MDX2600?) after the EX3200 as I'm only using the Expander on the DEQ2496?

Thanks in anticipation.

eZ

Greetings.Yes,you need the compressor.Or,you could come from the 3200 into the 2nd channel of the 2496 for compression then out to the 2024.

Howdy EeZee,
Welcome to the Forum!!!!

The equipment that you listed should perform very well.
You might want to insert the EX3200 in between the 2 channels of the DEQ2496 and use the expander and PEQ on the first channel of the 2496, then use the DEQ (compressor) on the second channel of the 2496.

Try NU9N.com for settings on the DEQ2496.

This configuration is talked about many times on the forum so you should be able to search and find more details on settings and placement.

Take Care,

Thanks guys - much appreciated.

Done as suggested - went back into the second chanel of the 2496 & bypassed everything but the compressor.

Bit more manical tweaking needed but sounds like the audio has a bit more punch to it.

Be cool - be wide

eZ