How to scope your signal

All the other Voodoo Audio Topics.
Post Reply
User avatar
ECC82
Voodoo Audiophile
Posts: 75
Joined: Tue Jul 03, 2012 1:06 pm
Location: The Netherlands

How to scope your signal

Post by ECC82 »

I was wondering: is there an easy way to monitor your signal on a scope?
Found a web site: http://www.cleanrf.com/
Could one of these parts be of any use or is there an easier/cheaper way?
===================
>> Livin' la VooDoo Loca <<
===================

KC7OV
Voodoo Audiophile
Posts: 61
Joined: Wed Feb 25, 2009 11:37 am
Location: Yelm,Wa.

Scoping your signal

Post by KC7OV »

Seen a video on "You Tube" instead of using rf sniffers,he just wrapped a piece of stranded wire around the coax then to the input of the scope.
Mike KC7OV

!KANT
Voodoo Audio Crew Moderator
Posts: 401
Joined: Wed Mar 09, 2005 10:22 pm
Contact:

Post by !KANT »

There was a design which was readily available online years ago--may have been from Tyler's site too. It was rather simple to make, so long as you had the necessary parts on hand it would take about 30 minutes to construct. [If I did it, ANYONE can do it :lol:] And it worked perfectly even with the ole-ass oscilloscope I had at the time.

!KANT
Voodoo Audio Crew Moderator
Posts: 401
Joined: Wed Mar 09, 2005 10:22 pm
Contact:

Post by !KANT »

You can also check out Alan's [W2AEW] video on Youtube. 8)

User avatar
ECC82
Voodoo Audiophile
Posts: 75
Joined: Tue Jul 03, 2012 1:06 pm
Location: The Netherlands

Post by ECC82 »

Nice video's, very helpful, tnx for the link.
Ordered a WaveNode this week.
http://www.wavenode.com/wn-2d.htm
Read good reviews.
Oscilloscope and Spectrum Analysis of the RF Modulation - Observe intermodulation and "Splatter" frequency components real-time: on your computer screen.
===================
>> Livin' la VooDoo Loca <<
===================

Post Reply