Page 1 of 1

flex -radio 5000a rx audio for audio amp info

Posted: Sun Oct 07, 2012 5:46 am
by g0uut
hi
i am looking to connect my flex 5000a audio to external audio amp +
SPEAKER is any one can recommend a good amp and speaker
and where i need to connect it from the flex 5000a to the aMP WHERE IT GO TO THE TUNER OUT OR ???
73 ELAN G0UUT :D

Posted: Tue Oct 09, 2012 9:28 am
by w5cul
Elan,

I am using an HT Omega Claro Halo XT sound card connected to a Logitech Z-5500 5.1 speaker system. So I take the Line-Out of the 5000A to the Line-In of the Claro Halo, and from there analog into the Z-5500. Since I have the RX2, I am able to listen to both receivers either individually right and left speaker or as a mix. However, the best sound comes from selecting RX1 and BIN for audio and then setting up the Z-5500 for surround sound. Talk about physically being inside of the audio ;-) When Mike (WZ5Q) gets on the air, it literally sounds like he is in the room with me.

Hope this helps.

Take care,