hi
i am looking to connect my flex 5000a audio to external audio amp +
SPEAKER is any one can recommend a good amp and speaker
and where i need to connect it from the flex 5000a to the aMP WHERE IT GO TO THE TUNER OUT OR ???
73 ELAN G0UUT
flex -radio 5000a rx audio for audio amp info
Elan,
I am using an HT Omega Claro Halo XT sound card connected to a Logitech Z-5500 5.1 speaker system. So I take the Line-Out of the 5000A to the Line-In of the Claro Halo, and from there analog into the Z-5500. Since I have the RX2, I am able to listen to both receivers either individually right and left speaker or as a mix. However, the best sound comes from selecting RX1 and BIN for audio and then setting up the Z-5500 for surround sound. Talk about physically being inside of the audio When Mike (WZ5Q) gets on the air, it literally sounds like he is in the room with me.
Hope this helps.
Take care,
I am using an HT Omega Claro Halo XT sound card connected to a Logitech Z-5500 5.1 speaker system. So I take the Line-Out of the 5000A to the Line-In of the Claro Halo, and from there analog into the Z-5500. Since I have the RX2, I am able to listen to both receivers either individually right and left speaker or as a mix. However, the best sound comes from selecting RX1 and BIN for audio and then setting up the Z-5500 for surround sound. Talk about physically being inside of the audio When Mike (WZ5Q) gets on the air, it literally sounds like he is in the room with me.
Hope this helps.
Take care,
W5CUL
Live from the Texas Hill Country......VMSDX# 21
Live from the Texas Hill Country......VMSDX# 21