FT 1000MP MARKV FIELD.

All the other Voodoo Audio Topics.
Post Reply
4L5O
Audio Head
Posts: 4
Joined: Fri Jun 06, 2008 6:16 am
Location: TBILISI, REP.OF.GEORGIA.

FT 1000MP MARKV FIELD.

Post by 4L5O »

HELLO TO ALL.

Please i have 1 question.

I have TRANSCEIVER (without modification)FT1000MP MARKV FIELD, Anybody can say how can i make menu settings for ESSB modulation?

Thank you.
4L5O.OMARI.

User avatar
Voodoo Guru
VooDoo Site Admin
Posts: 719
Joined: Wed Feb 23, 2005 8:47 am
Location: Down there on the right...

No Go

Post by Voodoo Guru »

Howdy Omari!!
Welcome to the Voodoo Forum!

Well we got some bad news for you,
You will never be able to get ESSB Transmission with a stock MKV.
Reason being is that you will always be limited to 2.7Kc in TX Bandwidth from the IF Filter.
This filter is Always defaulted in Transmission.
There is a Modification manual that has the best filter settings for these rigs.
It was penned by Mike, W5CUL and Jimbo, VE7RF.
It can be downloaded from here:
http://www.wz5q.net/voodoo-labs/index/mkvmods.htm
Maybe you will find your answers there.
Take Care,
Voodoo Guru
From Deep in the IDD of the Sub-Harmonix Realm

4L5O
Audio Head
Posts: 4
Joined: Fri Jun 06, 2008 6:16 am
Location: TBILISI, REP.OF.GEORGIA.

Re: No Go

Post by 4L5O »

HELLO MIKE.
Many thanks for information,
ok, i will buy TS870S.

KIND REGARDS,
4L5O.OMARI.

wz5q wrote:Howdy Omari!!
Welcome to the Voodoo Forum!

Well we got some bad news for you,
You will never be able to get ESSB Transmission with a stock MKV.
Reason being is that you will always be limited to 2.7Kc in TX Bandwidth from the IF Filter.
This filter is Always defaulted in Transmission.
There is a Modification manual that has the best filter settings for these rigs.
It was penned by Mike, W5CUL and Jimbo, VE7RF.
It can be downloaded from here:
http://www.wz5q.net/voodoo-labs/index/mkvmods.htm
Maybe you will find your answers there.
Take Care,

WA2E
Voodoo Audio Head
Posts: 10
Joined: Sat May 09, 2009 4:13 pm
Location: Central NJ

Good stock settings

Post by WA2E »

I'm looking for the same thing. Decent stock settings of the carrier offsets. I've read the mod doc many times to get familiar with it but there isn't any mention of good settings before changing out the filters. There must be a way to figure it but it's beyond knowledge. Anyone have any ideas?

Funny thing is before being interested in improved audio I had a TS-870 I sold to get the Field.

Mike

User avatar
Voodoo Guru
VooDoo Site Admin
Posts: 719
Joined: Wed Feb 23, 2005 8:47 am
Location: Down there on the right...

Post by Voodoo Guru »

Howdy Mike,
We don't know of any stock settings recorded anywhere.
The best way to set them is to listen to your Transmitted Audio with another Flat Receiver and adjust them on the fly.
Try to get the best balance with the audio equipment your running.
Be sure to write down the original settings first though, that way you always have a default to go back to.
Have Fun!
Voodoo Guru
From Deep in the IDD of the Sub-Harmonix Realm

KC7OV
Voodoo Audiophile
Posts: 61
Joined: Wed Feb 25, 2009 11:37 am
Location: Yelm,Wa.

Post by KC7OV »

Google VA3CR.Has the info plus for all your MP and MarkV needs.

!KANT
Voodoo Audio Crew Moderator
Posts: 401
Joined: Wed Mar 09, 2005 10:22 pm
Contact:

Post by !KANT »

I still say the TS-870....the best OUT OF THE BOX ESSB radio...

Still not sure how the FT-2000 stands up, but I've listened to recordings and the receiver audio quality could NOT quite compared to the '870...and it didn't quite become the "STANDARD"....--hell don't know these guys were smoking at the time.

Post Reply