Page 1 of 1
EX3200 or what?
Posted: Tue Aug 03, 2010 11:43 am
by INXS
Having read so much about the EX3200 here on the forum, it is no longer available by Behringer.
Can someone point me in the direction of how to acquire myself one, preferrebly one with the VOOOODOOO Mod. Also, is there a replacement for the EX3200, and if so, how does it compares to the EX3200?
Re: EX3200 or what?
Posted: Tue Aug 03, 2010 12:37 pm
by Bow
INXS wrote:Having read so much about the EX3200 here on the forum, it is no longer available by Behringer.
Can someone point me in the direction of how to acquire myself one, preferrebly one with the VOOOODOOO Mod. Also, is there a replacement for the EX3200, and if so, how does it compares to the EX3200?
EBAY
Or find another ESSB guy parting with his
Posted: Tue Aug 03, 2010 4:50 pm
by INXS
Is there any replacement for the EX3200?
Posted: Tue Aug 03, 2010 6:47 pm
by Voodoo Guru
Unfortunately there is no replacement for the EX3200.
Everything else lacks the Surround Processor which is vital for phasing the harmonix in between the harmonix when connected as shown in the UDX Mod.
Take Care,
Posted: Tue Aug 03, 2010 9:39 pm
by INXS
Thanks Gentlemen, now I will begin my quest of obtaining an EX3200.
PS. should anyone have an extra EX3200 for sale I'll be very much interested.
73 de Milverton.
Posted: Thu Aug 05, 2010 3:27 am
by YO3IBW
There where a discussion on this forum about
BEHRINGER SX3040 that this could be the new version of EX3200. Anyone did any test on this new box?
Posted: Thu Aug 05, 2010 8:32 pm
by XLAXX
I think I would hold off on purchasing a EX3200 right now,... the HFA04TB60PBF-ND HexFreds seem to be very hard to find. The backorder dates for them are over a year (5/2011) was what I was quoted today.
VooDoo Guru, can you recommend a substitute part or another value that would be acceptable to replace the HFA04TB60PBF-ND with?
Thanks.
XLAXX
Posted: Tue Aug 24, 2010 7:37 am
by XLAXX
... da Voodoo cometh and my cup runneth over...
Did the mod after ordering the Hex Freds from Farnell. The difference in the low end is truly amazing. I was very surprised.
My only problem at this point is fiddling with the higher end. I still can hear some distortion in my 'SSS' and 'TTTs' .
Any parameters I can re-adjust in the DEQ-2496 to help me out with this?
Thanks
XLAXX
Posted: Thu Sep 02, 2010 3:06 am
by Voodoo Guru
Howdy XLAXX,
Check out the post in this thread -
http://www.wz5q.net/talkvoodoo/viewtopic.php?t=316
Take Care,