Faulty Yaesu FT840
Faulty Yaesu FT840
My FT840 STOPS TRANSMITTING A FEW SECONDS AFTER PRESSING THE MIKE. THE ANTENNA, ATU AND POWER SUPPLY ARE OK. any idea what the fault could be. The ATU shows power out for a few seconds and then drops out. Thanks
Just two possibilities come to mind - to me.
One, is that the antenna SWR is outside of the range of its ability to tune the antenna you are using.
Second, since the SWR cannot be found acceptable by the radio after the antenna tuner failed to tune the antenna; the radio will fold back the output power ('protection circuit') in order to protect the final output transistors.
Just an observation - BTW.
One, is that the antenna SWR is outside of the range of its ability to tune the antenna you are using.
Second, since the SWR cannot be found acceptable by the radio after the antenna tuner failed to tune the antenna; the radio will fold back the output power ('protection circuit') in order to protect the final output transistors.
Just an observation - BTW.
I'm sure the tuner can tune for the radio to see a minimum VSWR [since it's an external unit.] Check the jumper cable between the rig and tuner. Also, specify whether or not it's occurring on all bands or just a particular band?? Continuing, do have any RFI anywhere at or surrounding area to the station--lvingroom, bedroom appliances??
Thanks for reply. Problem solved. Faulty power supply1!KANT wrote:I'm sure the tuner can tune for the radio to see a minimum VSWR [since it's an external unit.] Check the jumper cable between the rig and tuner. Also, specify whether or not it's occurring on all bands or just a particular band?? Continuing, do have any RFI anywhere at or surrounding area to the station--lvingroom, bedroom appliances??