MENU item 19 and TS950 SDX
Posted: Mon Aug 11, 2014 2:58 pm
Hi y'all Audioheads, Audiophiles and VooDoo Gurus!
I am curious, MENU item 19 is used to "set the cut-off frequency of the DSP BPF and LPF during receiving" but it also says that this MENU item works in FSK mode only. Now, I also tried in when in the SSB mode and switching to different high cuts made a difference to perceived audio on SSB. At the same time the low-cut is really high at 400 Hz so I guess I should leave this item alone as the manual says? You can change the high-cut, but the low-cut is even higher than 400 Hz for the other high-cuts so I don't like it! However, it does impact audio quality on receive and this MENU item is perhaps something that CAN actually improve the RX pass-band for a VMSDX??
Based on what the Manual says this MENU item shouldn't have any impact or more precisely the Manual says that this item 19 works in FSK only.....
OK, don't be too tough with your come-back
Cheers!
JJ
I am curious, MENU item 19 is used to "set the cut-off frequency of the DSP BPF and LPF during receiving" but it also says that this MENU item works in FSK mode only. Now, I also tried in when in the SSB mode and switching to different high cuts made a difference to perceived audio on SSB. At the same time the low-cut is really high at 400 Hz so I guess I should leave this item alone as the manual says? You can change the high-cut, but the low-cut is even higher than 400 Hz for the other high-cuts so I don't like it! However, it does impact audio quality on receive and this MENU item is perhaps something that CAN actually improve the RX pass-band for a VMSDX??
Based on what the Manual says this MENU item shouldn't have any impact or more precisely the Manual says that this item 19 works in FSK only.....
OK, don't be too tough with your come-back
Cheers!
JJ