TS-870: tweaking the menu

The Black Art of tweaking the Voo in the Doo...
Post Reply
User avatar
ECC82
Voodoo Audiophile
Posts: 75
Joined: Tue Jul 03, 2012 1:06 pm
Location: The Netherlands

TS-870: tweaking the menu

Post by ECC82 »

What would be the best ESSB setting(s) in the TS 870 menu.
Menu option 29 set to 3000 Hz is obvious but are there more settings to improve ESSB TX and/or RX?


Text from NU9N.com (best ESSB settings for Kenwood TS-870S)
Menu #29 Bandwidth 3000 Hz
Menu #30 Bandshift 0 or 100
Menu #31 TX EQ H or C
Menu #22 Mic AGC start @ 1 (try 0 or 2)

Any improvements via the service menu? Or is it better to stay well away from that menu?
http://www.hampedia.net/kenwood/ts-870s ... eaking.php

Suggestions are most welcome.
===================
>> Livin' la VooDoo Loca <<
===================

User avatar
w5kai
Voodoo Audio Head
Posts: 33
Joined: Sat Mar 19, 2011 7:33 pm
Location: Salty Swamps of Mississippi

Post by w5kai »

Hi ecc82, I think John has nailed it on the menu setting. Menu 31 depends on the voice and mic. If your gonna run some outboard eq'n or processing. I suggest turning menu 31 off and doing the c131 mod and feed'n the audio in the back. The service menu in the 870 is the reason most 870's went back for repair. Be careful or better yet stay out of it. There's not really anything in the service menu I know of that would help the audio. Have fun with your 870,
VMSDX # 24
Special Zombie Edition

User avatar
ECC82
Voodoo Audiophile
Posts: 75
Joined: Tue Jul 03, 2012 1:06 pm
Location: The Netherlands

Post by ECC82 »

OK, so better not use the Service Menu, that's what I thought.
The 870 has the C131 mod and receives audio from the rear already.
Tnx for the help. Best way to improve the audio further is external "gadgets".

Cheers,

Chris
PA3TVI
===================
>> Livin' la VooDoo Loca <<
===================

User avatar
Voodoo Guru
VooDoo Site Admin
Posts: 719
Joined: Wed Feb 23, 2005 8:47 am
Location: Down there on the right...

Post by Voodoo Guru »

Howdy Chris,

Yes, best thing is to stay OUT of the Service Menu!
We've tried many different settings as well as Greg, W5UDX and there really is no benefit to TX Audio in changing anything inside the Service Menu.

There have been several people that we personally know that have totally screwed up there settings and had to have the entire rig sent off for re-alignment. The settings inside the Service Menu are not saveable and once changed sometimes cannot be retrieved unless test equipment is set up and certain parameters followed.

Best to stay out.

Take Care,
Voodoo Guru
From Deep in the IDD of the Sub-Harmonix Realm

!KANT
Voodoo Audio Crew Moderator
Posts: 401
Joined: Wed Mar 09, 2005 10:22 pm
Contact:

Post by !KANT »

So true. And also all the parameter codes vary from unit to unit.

Post Reply