Hi
How much is the mic impedance from Acc2 ts950sdx?
Kenwood ta950 acc2 impedance
-
Voodoo Guru
- VooDoo Site Admin
- Posts: 722
- Joined: Wed Feb 23, 2005 8:47 am
- Location: Down there on the right...
Re: Kenwood ta950 acc2 impedance
I would say about 10KΩ into Pin-11 of the ACC2 Connector.
This is typical Line Level input impedance.
Be aware that C154 & C158 are only .1uF and will need to be increased to around 1uF to pass the low frequencies as this is originally an input for Packet Data.
The mod is here:
https://www.wz5q.net/talkvoodoo/viewtopic.php?f=9&t=358
This is typical Line Level input impedance.
Be aware that C154 & C158 are only .1uF and will need to be increased to around 1uF to pass the low frequencies as this is originally an input for Packet Data.
The mod is here:
https://www.wz5q.net/talkvoodoo/viewtopic.php?f=9&t=358
Voodoo Guru
From Deep in the IDD of the Sub-Harmonix Realm
From Deep in the IDD of the Sub-Harmonix Realm