Search found 20 matches

by Racer38
Fri Oct 04, 2013 1:36 am
Forum: Modification Maddness
Topic: This modification is for the Yaesu FT-857D / FT-897D models
Replies: 3
Views: 24465

This is really an old post, but you dont have to go through all the trouble as listed at that link..

Just call INRAD and get the 3.8 filter on a board for the FT-897. Cost me $147.00 shipped..

How can ya go wrong, a teenie wennie eSSB Rig !
by Racer38
Wed Feb 15, 2012 4:40 pm
Forum: The Audion Connection
Topic: Flex 5000 and eSSB
Replies: 1
Views: 8702

Flex 5000 and eSSB

Well the settings I discussed in my other thread didnt work as I still had some very minor tearing. It appears this has been an issue with the Flex 5000 for a long long time. However I did finally find the fix !! Set the mixer slider all the way to max, the Mic gain in the software to zero and set y...
by Racer38
Sun Jan 15, 2012 11:11 am
Forum: The Audion Connection
Topic: Flex 5000
Replies: 8
Views: 21938

Well 1st thing is to set all the TX Buffers for phone in the DSP to 4096, then put the meter on MIC set the front page mic gain to 1/2 way (35) bring up the mixer menu and set it around the 1/2 way point talk into the mic and adjust the gain on the rack gear to get the mic meter as close to 0 as po...
by Racer38
Sun Jan 15, 2012 7:24 am
Forum: The Audion Connection
Topic: Flex 5000
Replies: 8
Views: 21938

Well 1st thing is to set all the TX Buffers for phone in the DSP to 4096, then put the meter on MIC set the front page mic gain to 1/2 way (35) bring up the mixer menu and set it around the 1/2 way point talk into the mic and adjust the gain on the rack gear to get the mic meter as close to 0 as pos...
by Racer38
Sat Jan 14, 2012 5:00 pm
Forum: The Audion Connection
Topic: Flex 5000
Replies: 8
Views: 21938

Finally got it all cleaned up. I had to make quite a few adjustments to the PSDR software from stock installation, but it sounds Great now .. So it can be done with the latest software !!
by Racer38
Thu Jan 12, 2012 8:16 am
Forum: The Audion Connection
Topic: Flex 5000
Replies: 8
Views: 21938

I guess I am pretty close to getting rid of it. Its not there all the time and seems to be an intermittent issue. I used the leveler control in the software to clean most of it up. Its too bad that a radio of this caliber has this type of issue, its amazing all the different configurations available...
by Racer38
Wed Jan 11, 2012 6:33 pm
Forum: The Audion Connection
Topic: Flex 5000
Replies: 8
Views: 21938

Flex 5000

Anyone running a rack with a Flex 5000 ?? Just upgraded to the 5000 from my 1000 and I am having a few small issues with some tearing in the audio. I am guessing its in the software for the flex and not the rack gear as it was awesome with the 1000 and there are some differences between the 5000 and...
by Racer38
Mon Jun 13, 2011 4:40 pm
Forum: The Audion Connection
Topic: How to do this
Replies: 7
Views: 19645

HI I haven't changed any filters over yet, I've been listening to my audio on the FT847 and it sounds quite good so I'm now waiting till I get a Flex Radio. I use SDR-Radio to check out my audio remote out to 3996hz so I'll stick with it for now, I've also got a few more radio's I'd like to play ar...
by Racer38
Mon Jun 13, 2011 3:55 pm
Forum: The Audion Connection
Topic: How to do this
Replies: 7
Views: 19645

Did you change out the SSB filter in the radio ?? I have an 847 as a second radio and was looking at the 2.9 SSB crystal filter. The radio is really pinched up with out one of these. I just havent gotten one yet.
by Racer38
Sun Jun 12, 2011 5:07 am
Forum: The Audion Connection
Topic: Another SDR-1000 Question
Replies: 8
Views: 19487

Well the DEQ2496 issues were fixed after talking with a friend. I had to open it up and put some electrical tape on the bottom of the main board over all the solder points. They seem to be close enough to the case to cause a short which powers it down and back on. He said its a common problem with t...
by Racer38
Wed Jun 01, 2011 12:42 pm
Forum: Modification Maddness
Topic: DEQ-2496 Issues
Replies: 0
Views: 8262

DEQ-2496 Issues

Well before I sent my brand new DEQ-2496 back for a problem, a friend told me how to fix it. My DEQ-2496 developed a weird problem after a day or so, it would sporadically power down then back up again. I knew it had to be a power issue of some sorts. Well a friend told me to open the unit up and pu...
by Racer38
Mon May 30, 2011 6:19 am
Forum: The Audion Connection
Topic: DSP-1124P Settings
Replies: 2
Views: 9916

Never mind I think I figured it out

1/8 would be around 7

1/2 would be 30

3/2 would be 90

So I am closer to having this working and sounding decent.
by Racer38
Mon May 30, 2011 5:39 am
Forum: The Audion Connection
Topic: DSP-1124P Settings
Replies: 2
Views: 9916

DSP-1124P Settings

Ok My DEQ2496 has to be replaced, I do have the 1124P as a back up and will use it in the EQ mode only. I suck at math and cant for the life of me figure out the band width settings. On the DEQ I was using the following Octaves 1/8 1/2 3/2 Could someone explain how to convert these to setting on the...
by Racer38
Mon May 30, 2011 5:01 am
Forum: The Audion Connection
Topic: Another SDR-1000 Question
Replies: 8
Views: 19487

We understand completely!! You will find the DEQ2496 is very flexible with all of the functions it performs. The DSP1124P is great for specialty use if you have allot of 'Slice & Dicing' to do in the EQ Spectrum. Such as is necessary when pushing a TS-870 out to 4k and beyond. Good to have as a spa...
by Racer38
Tue May 24, 2011 7:52 pm
Forum: The Audion Connection
Topic: Another SDR-1000 Question
Replies: 8
Views: 19487

Well I hooked up the 2496 today and used some base settings from the NU9N.com website. It doesnt sound bad but I'm not using the GEQ as of yet and not sure where to go with that. This thing has more settings than I think I will ever learn. So it sounds Ok with my PR-781 Mic, I also have a nice AKG P...
by Racer38
Tue May 24, 2011 2:04 pm
Forum: Sale, Sale, Sale!!
Topic: WANTED - Behringer DEQ-2496
Replies: 1
Views: 8487

I just picked one up.. Thanks for looking
by Racer38
Tue May 24, 2011 3:54 am
Forum: The Audion Connection
Topic: Another SDR-1000 Question
Replies: 8
Views: 19487

Well I got a super deal on the 1124 and then later found the 2496 which I was told was a much better EQ so I ordered it. I'll give both a try and stay with the one I like the best and keep the other as a back up..

Being new I tend to go overboard hahaha
by Racer38
Tue May 24, 2011 3:29 am
Forum: The Audion Connection
Topic: Another SDR-1000 Question
Replies: 8
Views: 19487

Wow no comments ?? My Rack gear will be here this week, the EQ will be here today on the Brown Truck and I will be picking up the new PreAmp on Thursday. I have been getting good results with the SDR-1000 just as she is using the software 10 band equalizer so I am hoping for better results with the ...
by Racer38
Sat May 21, 2011 1:59 pm
Forum: The Audion Connection
Topic: Another SDR-1000 Question
Replies: 8
Views: 19487

Another SDR-1000 Question

Well I am starting to get into eSSB and picked up a nice used SDR-1000 with a 100 watt PA. Its up and running and is just awesome !! Up to 10 wide on TX and RX SSB. Anyway current set up is the SDR-1000 with the Edirol FA66 sound card, a Behringer Tube Ultragain Mic200 pre amp and a 781 Mic. Its all...
by Racer38
Sat May 21, 2011 1:41 pm
Forum: Sale, Sale, Sale!!
Topic: WANTED - Behringer DEQ-2496
Replies: 1
Views: 8487

WANTED - Behringer DEQ-2496

Looking for a good deal on a Behringer DEQ-2496 .. Anyone Selling ?