Search found 722 matches

by Voodoo Guru
Fri Aug 30, 2024 8:34 am
Forum: Yada, Yada, Yada......
Topic: connection recording for ftdx5000mp
Replies: 1
Views: 1641

Re: connection recording for ftdx5000mp

Hi Elan,

Unfortunately we have not had one of those rigs here to play around with so we got nothing.

Anyone else know about these rigs?
by Voodoo Guru
Fri Aug 30, 2024 8:29 am
Forum: The Audion Connection
Topic: I'm back. Pse, i need help for modules connection
Replies: 1
Views: 1979

Re: I'm back. Pse, i need help for modules connection

Hi Alex, It will be difficult to get any kind of Voodoo Audio from an Icom as they re ALL limited to 2.9Kc Bandwidth on Transmit. In order to get a good audio spectral balance at that narrow bandwidth takes some creative high frequency work and lots of cuts on the low frequencies. The Audio can be m...
by Voodoo Guru
Fri Aug 30, 2024 8:22 am
Forum: Maniacal Microphones
Topic: Kenwood ta950 acc2 impedance
Replies: 1
Views: 828

Re: Kenwood ta950 acc2 impedance

I would say about 10KΩ into Pin-11 of the ACC2 Connector. This is typical Line Level input impedance. Be aware that C154 & C158 are only .1uF and will need to be increased to around 1uF to pass the low frequencies as this is originally an input for Packet Data. The mod is here: https://www.wz5q.net/...
by Voodoo Guru
Wed Mar 31, 2021 10:56 am
Forum: Sale, Sale, Sale!!
Topic: Wanted: TRX Board for TS950SDX
Replies: 1
Views: 6464

Re: Wanted: TRX Board for TS950SDX

Hi Bruce, That is unusual for those components to fail. The most probable cause for issues on the TRX Unit is the resistor getting too hot and melting the solder on it due to its wattage rating being too small for the current going thru it. Reference this link: http://www.voodoo-labs.com/index/sdxmo...
by Voodoo Guru
Wed Feb 06, 2019 2:41 am
Forum: Modification Maddness
Topic: help please connection ts 950sdx with sm-230 scope 8 pin din
Replies: 3
Views: 20349

Re: help please connection ts 950sdx with sm-230 scope 8 pin din

Hi guys! I need this Din 8 pin conector. It is completely different . I did not find anyone here in BrasiL that fix in scope terminal in my TS-950SDX and SM-230. I found only 8 pin Din 270 and 262 grades. Any help? 73! We no longer have an SM230 or the cables to look at or compare, but looking at t...
by Voodoo Guru
Mon Jan 08, 2018 5:47 am
Forum: Yada, Yada, Yada......
Topic: What to do and which way to go
Replies: 3
Views: 15085

Howdy NKS, Congrats on the Tech Special MKV! Hope you can get it operational soon. We would suggest you get it 100% operational in stock form before any modifications or any major purchases of expensive mod parts like transformers and filters. You can get the JT-11-FLCF directly from Jensen Transfor...
by Voodoo Guru
Sun Oct 29, 2017 10:13 am
Forum: Tricks of the Trade
Topic: Going wide for FM
Replies: 2
Views: 13525

Howdy, Sorry for the big delay in the response, life's issues prevailed. Unfortunately, We've not played in the area of FM. We used to talk to a group in Dallas, TX about 350 miles from here on 2m FM Simplex. That's the avenue they took, tweaking there audio on FM and they had some beautiful audio. ...
by Voodoo Guru
Sun Oct 29, 2017 9:31 am
Forum: To VOODOO, or Not To VOODOO
Topic: IC 7300 - Girlyman TRX by design?
Replies: 7
Views: 31908

Howdy Andy, Sorry for the big delay, but we've had some issues happening here that has diverted our attention. Hopefully in his next year we will have a bigger presence here on the forum. No experience here with the IC-7300. We tend to keep to the older designs without the evil, oppressive DSP circu...
by Voodoo Guru
Sun Oct 29, 2017 9:26 am
Forum: Modification Maddness
Topic: Yaesu FT-1000MP MKV
Replies: 1
Views: 11112

Howdy Big Mike,
Sorry for the big delay in answering but we've had issues here.

Hope you found someone to do this for you, we no longer perform this mod.

Good Luck,
by Voodoo Guru
Sun Oct 29, 2017 9:25 am
Forum: Modification Maddness
Topic: Bellari RP562 hum
Replies: 2
Views: 12982

Howdy Chris,
More then likely the problem is with the filter capacitors in the low voltage +-15V power supply. This is a common problem with the Bellari equipment. We have also had problems with the voltage regulator transistor in the high voltage power supply creating hum and noise.

Good Luck!
by Voodoo Guru
Sun Oct 29, 2017 9:16 am
Forum: Modification Maddness
Topic: Audio in location for a ft 897d
Replies: 2
Views: 12610

Howdy Tuner, Welcome to the Forum! We hope you enjoy your stay here. Due to life's unexpected twists and turns, we've not been able to post very much to the Forum. This will hopefully change in the next year. Were not familiar with the FT-897D, but the Data Input jack on most rigs is not a good plac...
by Voodoo Guru
Fri Feb 03, 2017 12:37 pm
Forum: The Audion Connection
Topic: Rolls-Bellari Company.
Replies: 2
Views: 16696

Yes, they still exist. We just talked to Alex their Bellari engineer a few days ago and ordered some parts.
Don't know why they are not answering your emails.
Maybe they are not getting them, or maybe you are not getting there replies??
by Voodoo Guru
Thu Feb 02, 2017 4:38 am
Forum: The Audion Connection
Topic: Full duplex??
Replies: 4
Views: 19152

That is the first I have heard of it.
I take it you meant you were listening on 3630, you wrote 3360.

Only thing I could think of is if conditions were real long, the stations you heard were close together so they might have all been listening to a remote SDRweb receiver.
by Voodoo Guru
Tue Jan 17, 2017 5:38 am
Forum: Modification Maddness
Topic: TS870 - C131 Cap Mod
Replies: 13
Views: 55854

Re: Use of ACC2 for original purpose

Does the cap mod prevent the ACC2 connection from being used for data modes? My assumption is that the change in audio characteristics should have no effect on data modes therefore not requiring any de-mod or switching. Howdy and welcome to the Forum! Unfortunately due to a QTH move and other life ...
by Voodoo Guru
Mon Mar 21, 2016 4:18 am
Forum: Modification Maddness
Topic: Flattest Monitor??
Replies: 7
Views: 31205

Howdy,
The program used for the graphing was SpectraPlus-SC.
by Voodoo Guru
Fri Jan 01, 2016 9:28 am
Forum: Modification Maddness
Topic: Triple C latest firmware.
Replies: 4
Views: 21228

Hello Cor,
Your antivirus or email provider probably killed it thinking it was a virus.
It was uploaded to the server here and this is the link. You should be able to download it directly then unzip it.

http://www.wz5q.net/manuals/tcelectronic/TriC2024.zip

Try that.
by Voodoo Guru
Thu Dec 31, 2015 7:04 am
Forum: Modification Maddness
Topic: Triple C latest firmware.
Replies: 4
Views: 21228

Hello Cor,
Yes it looks like they removed this from their website.
An email was sent with a Zip file that contains the Firmware Update.
The instructions are included in the program.
Let us know if that helps ya out.
Take Care,
by Voodoo Guru
Tue Mar 10, 2015 6:34 pm
Forum: The Audion Connection
Topic: trs or xlr?
Replies: 2
Views: 15218

Howdy kb2whb, In our experience, regardless of whether the Balanced Cable uses a TRS or XLR connector on the ends, if it is wired as Balanced then they are effectively the same. As a preference, we like the XLR connectors, but they both work very well. Some rack units have so many Input and Outputs ...
by Voodoo Guru
Mon Mar 09, 2015 7:52 am
Forum: The Audion Connection
Topic: Looking for Bellari RP533 Schematic
Replies: 1
Views: 14000

Howdy Ben, Welcome to the Forum, great to have ya. Unfortunately, Bellari keeps their schematics as top secret as Drawmer. You might have your tech call the engineers up at Bellari and maybe they can give a partial schematic of the area your having issues with. The guys at Drawmer have done this for...
by Voodoo Guru
Mon Mar 09, 2015 7:26 am
Forum: Modification Maddness
Topic: Icom 756: Increasing the TX and RX Audio Bandwidth
Replies: 20
Views: 76906

PDF Mod

Howdy Daniel, We've added your PDF Mod to our server and changed the link in your original Post. So to all of those who were looking for the mod, the link in the original post above now works. It is also posted here for your convenience... http://wz5q.net/docs/ea3hru_ic756_rx_and_tx_bandwidth_mods.p...