X-treme eSSB Audio FORUM

I have and certainly enjoy what the HHB Classic 70 does for my rack (modified of course ) . This baby plays some real goodness, Its a definite keeper!!

If memory serves me right, The SDR 1500 does not have the tx bandwidth that the SDR 5000 has. I believe it will only go out to 3.0kc. Something you may want to check into.

My settings on the EX3200 are: channel one low mix 1,NR sensitivity 1, tune 2.2,process Enhance, high mix 3, surround 2 1/2, channel 2: low mix 1 NR sensitivity 1, tune one click above the half mark between 2.2 and 3, process Enhance high mix 3. Those are my settings, they seem to work great! your w...

yes, till you get a mic pre. that will work.

Howdy do, Welcome to the forum. You will be using the left channel of each unit. All of your cabling (Star quad Canare preferred) should be balanced except from channel one to channel two on the EX3200 (using TRS jacks on a unbalanced jumper). You input to channel one then take a unblanaced TRS jump...

Howdy do, To touch base on one of your questions. (Has anyone used the Art clean box?) I think you are wanting to use these in between each piece of gear? I do not use anything except the Canare cabling and 2 pieces of ferrite mix 31 on each audio cable input and output as well as the power cables. ...

Hey Jim, Well, you are correct. the IC-7000 is not a Voodoo audio machine. But you should be able to make it sound pleasant to the ear. There is a lot of good info in the previous threads on the forum. Or you can check out nu9n.com or w3oz.com. These both have good info. I think W3OZ even has some E...

Howdy do, Interesting line up. I had noticed that you have 2 Mic pre's? Can you fill us in there? I believe the DBX286a is your best bet on the mic pre and downward expander. You need a Parametric EQ to go next inline for the shaping, next the EX3200 on into a compressor then into the Virtualizer pr...

Hello Jim, Most all of the Icom line can not be modified for BW :plasma: . What you see is what you get. The best thing to do is find an even balance with the BW that you have. Keep the highs and lows within 100Mc to 2900Mc. Try not to extend the bottom end much under 100Mc on the 7000, as it will i...

Hey Chuck!!!
Glad to have you on board!! I'm sure once you get your TS870 and rack together, you will be glad you did!!
Hope to hear your New Voodoo on the air!!!
Catcha l8r Eddie

Hello Chuck , Welcome to the forum. You will need Several quality audio cables in your application. One XLR Balanced cable running from your mic to your mic preamp , You did not mention anything about an EQ, But this would be next in the line up and very much recommended. Then a XLR balnaced cable f...